1. Overview

The machine isdesigned and further improved on the base of original full automatic capsulefilling machine from both home and aboard. With high technology and exclusiveperformance, it has reached international leading level. It is an idealequipment for capsule and medicine in pharmaceutical industry which is in fullcompliance with GMP requirements.

Itadopted PLC programmable controller, stepless frequency inverter, touch paneloperation. With fault or lack of material, the machine will automatically alarmand shut down, and eliminate automatic alarm after troubleshooting.

2. Usage

It issuitable for capsule filling of powder, tablet and pellets.

3.Feature

1. It has beenimproved the inner design turret, and using the imported Japan bearingdirectly, so that it can be sure a longer usage-life and precision of machine.

2. The workingstation cam runs under the good lubricating condition, and maintains the innerlubrication of cam slot to a full extent, increasing the pressure pulverizationoil pump, thus extends the operation life of the spare parts.

3. Single movementfor both upper and lower moulds with two-lip seal, provide a much bettersealing performance.

4. It is controlledby the PLC and touch screen, has a stepless timing with the frequencyconversion, the numeral showing makes an easy operation and clear appearance.

5. The multi-boredosing brings a precision dosage (it is controlled around +_3.5%). The capsulequalified rate is higher than 99%. It can be filled with the Chinesetraditional medicine and the Western medicine.

6. It has a protectorequipment for the operator and the machine. It has an automatic pause devicewhen it is lack for the material. It has a steady and safe working, it is thebest choice for the hard capsule factories.

7. Additional fuctionof blowing and suction of module, ensure clean dust in mould hole and improvecapsule body filling rate.

4.Notes:

·Stablein running, safe and reliable

·Capsuleentering accuracy ≥99%, with precise dosage

·Withfrequency converter, PLC control

·Newstructure, conform to GMP requirement

5.Main Technical Parameters